GM E80 ECM Programming Harness
for 2015-2017 1.4L 1.5L 1.6L 2.0L 2.5L Engines

Part #: 100-01059
Dimensions
- Weight: 10 Pounds
This Engine Control Module (ECM) programming harness is to be used with any of our BenchForce™ PowerBlock switch assemblies to reprogram E80 ECMs outside of the vehicle.
OBD2 Switch Assembly Pass-Through Harness ECU harnesses connect to the OBD2 switch assembly through a short pass-through harness. This E80 ECM programming harness requires a Pass-Through Harness. The BenchForce™ PowerBlock uses EFI# 100-01072. Pass-Through Harness sold separately. E80 ECMs Contain Internal CAN Termination This simply means that an external CAN termination resistor is not required and that the E80 ECM can be programmed on the benchtop with a direct connection to the OBD2 Switch Assembly using a Pass-Through Harness. The BenchForce™ PowerBlock uses EFI# 100-01072. | CLICK TO ENLARGE IMAGE IN NEW WINDOW ![]() |
E80 ECM - SUPPORTED VEHICLES * | |||
---|---|---|---|
YEAR | MAKE | MODEL | ENGINE |
16 | Buick | Cascada | 1.6L |
15-17 | Buick | Envision | 2.0L, 2.5L |
16-17 | Cadillac | ATS | 2.0L, 2.5L |
16-17 | Cadillac | CT6 | 2.0L |
16-17 | Cadillac | CTS | 2.0L |
16-17 | Chevrolet | Camaro | 2.0L |
15-16 | Chevrolet | Colorado | 2.5L |
16-17 | Chevrolet | Cruze | 1.4L |
16-17 | Chevrolet | Malibu | 1.5L, 2.0L |
15-17 | Chevrolet | S10 (Brazil) | 2.5L |
15-16 | GMC | Canyon | 2.5L |
15-16 | Holden/Opel | Astra | 1.6L |
15-16 | Holden/Opel | Cascada | 1.6L |
* While this E80 ECM programming harness is compatible with all E80 ECM equipped vehicles listed above, there may be many E80 ECM service numbers. The ECM service number should match the vehicle service calibration to avoid potential damage to the ECM. Caution should be taken to ensure ECM/program compatibility before service programming. |