12V PowerBlock™ Switch Assemblies
Head over to the new site by clicking here!
PowerBlock™ - Vehicle Wiring. Simplified.
BenchForce™ PowerBlock is the central hub for powering up an ECU on the bench. PowerBlock is a circuit board solution that simplifies a vehicle's wiring into one simple CNC machined billet aluminum enclosure.
Through the use of add-on harnesses, PowerBlock can handle just about any bench programming - especially OBD-II and J1939 applications. Connect your USB or serial laptop-to-vehicle programming interface to PowerBlock's OBD-II diagnostic connector and then choose from the growing selection of BenchForce ECU harnesses.
PowerBlock™ on the Bench
ECU > ECU Harness > Pass-Through > PowerBlock
Several simple steps and you'll be ready to connect your programming interface tool to PowerBlock's OBD-II diagnostic connector.
J1939 9-Pin Diagnostic Connector Support
J1939 programming tool support is available with the use of our OBD-II 16-pin DLC to J1939 9-pin DLC harness. ECUs that support both OBD-II and J1939 need only change the pass-through harness for dual protocol compatibility!
PowerBlock's OBD-II 16-pin DLC follows industry standards. J1939 9-pin DLC has no standard. It is important to verify proper 9-pin DLC pin layout to ensure compatibility with your programming interface tool.
PowerBlock™ IV - ROM Boot Support
To provide for the Cummins ECU ROM boot feature, we added a momentary switch to the face of the PowerBlock II, anodized the housing red, and called it PowerBlock IV.
PowerBlock IV supports OBD-II and is best-suited for J1939 because of its included ROM boot switch for Cummins ECUs.
Head over to the new site by clicking here!
| Part # | Description | Price | Qty | |
|---|---|---|---|---|
|
140-00019 | BenchForce™ PowerBlock II 12v Switch Assembly for OBD-II Programming | $0.00 | Item is not For Sale |
|
140-00020 | BenchForce™ PowerBlock III 12v Switch Assembly for OBD-II Programming | $0.00 | Item is not For Sale |
|
140-00023 | BenchForce™ Starter Kit for Heavy Duty J1939 Extreme duty case with PowerBlock IV switch assembly, J1939 pass-thru harness, OBD-II to J1939 harness, and battery cable | $0.00 | Item is not For Sale |
|
140-00026 | BenchForce™ PowerBlock IV with ROM Boot 12v Switch Assembly for OBD-II and J1939 ECU Programming | $0.00 | Item is not For Sale |
|
140-00026-B | BenchForce™ PowerBlock IV with ROM Boot BLEMISH (Blemished Item) | $0.00 | Item is not For Sale |
BenchForce™ HD J1939 Programming
- 12V PowerBlock™ Switch Assemblies
- Adapters and Accessories
- CUMMINS HD J1939 Programming Harnesses
- CATERPILLAR Programming Harnesses
- INTERNATIONAL® Programming Harnesses
- PACCAR Programming Harnesses
- Mack / Volvo
Best Sellers
EFI 24x Crank and Cam Signal Kit w/ CKP Sensor
for 1992-1995 LT1/LT4 Engines w/ Single Row Timing Set
