24x Packages
Our 24x packages are intended to be used with early small-block Chevy engines and LT1/LT4 engines. These
packages will supply you with the components necessary to use the LS1 PCM. Packages include crank/cam signal
hardware, engine wiring harness, LS1 PCM, and 8 ignition coils.
| Description | Availability | Price | |
 |
24x Early Small-Block Chevy Package for Cable Throttle
Includes 24x crank reluctor, 24x crank sensor, aluminum Vortec distributor, sealed distributor cap,
cam sensor, Vortec timing cover, 4ft stand-alone engine harness, LS1 PCM, 8 LS coils, and coil harness kit.
| In Stock | $1500.00 |
|
|
24x Early Small-Block Chevy Package for Electronic Throttle
Includes 24x crank reluctor, 24x crank sensor, aluminum Vortec distributor, sealed distributor cap,
cam sensor, Vortec timing cover, 4ft stand-alone engine harness, LS1 PCM, 8 LS coils, coil harness kit,
electronic TPI/LT1 throttle body (52mm, 58mm, or Mono-Blade), TAC module, electronic pedal, and TAC to pedal harness.
LS1 Corvette throttle body core or $150 core charge is required.
| In Stock | $2500.00 |
|
|
24x LT1/LT4 Package for Cable Throttle
Includes 24x crank reluctor, 24x crank sensor, 1x cam reluctor, cam sensor housing, cam sensor,
4ft stand-alone engine harness, LS1 PCM, 8 LS coils, and coil harness kit.
| In Stock | $1500.00 |
|
|
24x LT1/LT4 Package for Electronic Throttle
Includes 24x crank reluctor, 24x crank sensor, 1x cam reluctor, cam sensor housing, cam sensor,
4ft stand-alone engine harness, LS1 PCM, 8 LS coils, coil harness kit,
electronic TPI/LT1 throttle body (52mm, 58mm, or Mono-Blade), TAC module, electronic pedal, and TAC to pedal harness.
LS1 Corvette throttle body core or $150 core charge is required.
| In Stock | $2500.00 |
|
|
| 24x Crank and Cam Hardware Only |
| 24x LT1 and LT4 |
24x Early Small Block Chevy |
24x Vortec Small Block Chevy |
Includes:
24x Crank Reluctor
24x Crank Sensor
1x Cam Housing Kit
|
Includes:
24x Crank Reluctor
24x Crank Sensor
Vortec Distributor
Sealed Distributor Cap
Vortec Timing Cover
|
Includes:
24x Crank Reluctor
24x Crank Sensor
Sealed Distributor Cap
|
$525.00
|
$515.00
|
$375.00
|
24x Components
Only need a few parts for your project?
| Description | Availability | Price | |
 |
24x Crankshaft Reluctor - LT1 and LT4 Engines
For use with LT1/LT4 and Gen1 small-block Chevy engines with a single roller timing chain only. This ring produces the 24x crank signal required by the Gen3 LS type PCMs. | In Stock | $275.00 |
|
 |
1x Camshaft Housing Kit - LT1 and LT4 Engines
Our LT1/LT4 cam sensor housing kit replaces the optispark module. The 1x cam reluctor bolts to the cam sprocket, the housing bolts in place of the optispark module, and the GM cam sensor is bolted to the front of the housing. The sensor actually gets its signal through the aluminum housing! | In Stock | $220.00 |
|
 | 96-97 LT1 Crankshaft Key
For use with 92-95 LT1/LT4 engines to allow the 24x crank reluctor to be fixed on the crankshaft. All 96-97 LT1/LT4 engines are already equipped with this key. | In Stock | $10.00 |
|
| 24x Crankshaft Reluctor - Small-Block Chevy Engines
For use with Gen1 small-block Chevy engines with either a single or double roller timing chain. Not for use with LT1/LT4 engines. This ring produces the 24x crank signal required by the Gen3 LS type PCMs. | In Stock | $275.00 |
|
 | Vortec Distributor Cap - Sealed
For use with Vortec distributors when converting to coil per cylinder. This cast aluminum piece replaces the original Vortec distributor cap when using a Vortec distributor for a cam signal only. | In Stock | $25.00 | |
 | Vortec Timing Cover - Small Block
For use with Gen1 small-block Chevy engines. Cover has provision for a crankshaft position sensor. Engine blocks prior to 1996 will require additional silicone to properly seal. | In Stock | $50.00 |
|
 | 24x Throttle Body ID Plate
Have you installed our 24x system? Show 'em what you've got! This annodized black ID plate will fit the TPI/LT1 throttle body. | In Stock | $15.00 |
|
 | 58x Throttle Body ID Plate
This annodized black ID plate will fit our electronic TPI/LT1 throttle bodies. | In Stock | $15.00 |
|
 | LS2 Ignition Coil Bracket Assemblies - One Pair Fully Dressed
Includes two aluminum CNC coil brackets, 8 LS2 ignition coils (stamped 12573190), coil harnesses, and attaching hardware. Fits Small-Block Chevy and LT1/LT4 with center bolt valve covers. | In Stock | $550.00 |
|
 | LS2 Ignition Coils (stamped 12573190) - Set of 8
Brand new ignition coils (set of 8) for LS type systems. | In Stock | $200.00 |
|
 | Coil Connector Pigtail (12573190) - Set of 8
Coil connector pigtails (set of 8) for ignition coil 12573190. | In Stock | $65.00 |
|
 | 24x Crankshaft Position Sensor
For use with Gen1 small-block Chevy, LT1, LT4, and 7.4L Vortec big-block Chevy engines. REQUIRED for 24x conversion. | In Stock | $95.00 |
|
 | 1x Cam Sync Distributor
For use with Small/Big Block Chevy engines. Distributor is used as a cam signal and method to drive the oil pump. | In Stock | $125.00 |
|
 | Oil Pressure Sensor Kit for SBC and LT1
GM# 12574403 Sensor, 3/8 NPT Female to 1/8 NPT Male Reducer, and Sensor Pigtail. Used to bring an oil pressure signal into an LS PCM datastream. NOT REQUIRED for 24x or 58x conversion. LS engines use GM# 12573107, which is an undesirable 5/8-18 thread for early SBC and LT1 engines. | In Stock | $80.00 |
|
|
